Hanhart Pioneer Mk I White Dial

2 to 3 Week Delivery

The PIONEER Mk I is the replica of the “Calibre 40”, the first precision chronograph produced by Hanhart in 1938. All of the chronograph functions on this unconventional model – start, stop and zero setting – are performed by a single button and always strictly follow each other. Unlike its two-button equivalent, the seconds hand on this chronograph cannot be restarted from the point at which it is stopped; the next press of the button invariably returns the spring to the original starting point. This meant that the automatic Calibre used for the Mk I also had to be redesigned slightly.

The PIONEER Mk I is the replica of the “Calibre 40”, the first precision chronograph produced by Hanhart in 1938. All of the chronograph functions on this unconventional model – start, stop and zero setting – are performed by a single button and always strictly follow each other. Unlike its two-button equivalent, the seconds hand on this chronograph cannot be restarted from the point at which it is stopped; the next press of the button invariably returns the spring to the original starting point. This meant that the automatic Calibre used for the Mk I also had to be redesigned slightly.

MOVEMENT
Automatic chronograph movement HAN3601
Basis: ETA7753
Mono-pusher conversion
28,800 vibrations per hour, 4 Hz, 27 jewels
Power reserve of min. 42 hours

FUNCTIONS
Small second
30-minute counter

CASE
Stainless steel
Diameter 40 mm, height 15 mm
Large crown and red button
Fluted rotating bezel
Anti-reflective convex sapphire glass
Screwed-down case back
Water-resistant to 10 bar/10 ATM

DIAL
Off-white or black
Super-LumiNova® coated numerals and hands

STRAP
Calfskin or stainless steel